Frosting question

Information on electric installation and anything related to electric.
Design, materials, sources & prices, for separate topics on:
- Wiring diagrams, regulations and standards
- materials, installation, connection.
- sources & prices
- hazards and trouble shooting
Before you post any questions, download Itchy's tutorials and search for an answer there.

Moderators: Sometimewoodworker, MGV12, BKKBILL, pattayapope, Attila

Frosting question

Postby RyanCaleb » Tue Oct 31, 2017 4:45 pm

Hello all,

Found a Toshiba DX unit short of refrigerant (R410a), electronic sniffer going off at flare.
Gauges showing 70psi suction and 290psi Discharge.

I was lead to believe that when a unit is short, the refrigerant bubbles off early causing to much superheat. so frosting early in the evap coil and expansion line, and a warm suction pipe and hot discharge pipe.

But this dx unit had a sweating expansion line and a frosting suction line through the suction line accumulator and all the way back to the compressor. Airflow was good over the evap coil.

Just wondered why this is happening??
Thanks





I didn't find the right solution from the internet.
References:
http://www.refrigeration-engineer.com/f ... g-question

<advertising link removed - mod>
RyanCaleb
 
Posts: 2
Joined: Fri Oct 27, 2017 9:12 pm

Return to electric

Who is online

Users browsing this forum: No registered users and 0 guests

cron