Workshop and house, Non Sa-At ½ way between KK & Udon

Any story related to building in the LOS, whether everything turned out hunky dory or not!

Moderators: MGV12, BKKBILL, fredlk

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby schuimpge » Mon Mar 07, 2016 10:47 pm

Tilapia and mud-carp..
User avatar
schuimpge
 
Posts: 1318
Joined: Mon Dec 10, 2012 11:01 am
Location: Pathumthani, Thailand

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Tue Mar 08, 2016 6:00 am

schuimpge wrote:Tilapia and mud-carp..

They were the small ones, there were about 4 this size. SWMBO & mum have fun with them
image.jpg
Sometimewoodworker
 
Posts: 1848
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby schuimpge » Tue Mar 08, 2016 6:13 am

Tilapia can pack some good weight..
Mud Carp are much less voluminous, but beautiful fish to see..
Got both in my pond at work (and they stay fit from running away from the red-tails and the Arapaima... :lol:
User avatar
schuimpge
 
Posts: 1318
Joined: Mon Dec 10, 2012 11:01 am
Location: Pathumthani, Thailand

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Bangyai » Wed Mar 09, 2016 4:37 pm

Coming on very nicely SWW. Hope it continues the same way. No builder myself so can't give any advice except ' patience is a virtue '
Bangyai
 
Posts: 335
Joined: Mon May 19, 2014 10:01 pm

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Wed Mar 09, 2016 8:46 pm

March 8th

Not too many pictures today as we needed to take a trip to Udon. One of the reasons was to visit another build, it was very interesting.

Also to go to a good seafood place.

image.jpg
Nui's lunch


image.jpg
My lunch German style pork knuckle


image.jpg


image.jpg


image.jpg


image.jpg


image.jpg
Last edited by Sometimewoodworker on Wed Mar 09, 2016 9:15 pm, edited 1 time in total.
Sometimewoodworker
 
Posts: 1848
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Wed Mar 09, 2016 9:08 pm

March 9th


image.jpg
Corrected 2 x 45degree bends


image.jpg


image.jpg


image.jpg
3 teams at work today


image.jpg


image.jpg


image.jpg
Sometimewoodworker
 
Posts: 1848
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby andymac » Thu Mar 10, 2016 10:18 am

SWW

I really like that last high level shot, the space is huge, makes me feel I should've supersized my little place :D
Will you be leaving the underside of the roof and steel support exposed? It would be a shame to hide it.

Cheers,
Andy
User avatar
andymac
 
Posts: 252
Joined: Fri Feb 24, 2012 10:55 am
Location: Hong Kong & Chiang Mai

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Thu Mar 10, 2016 11:09 am

andymac wrote:SWW

I really like that last high level shot, the space is huge, makes me feel I should've supersized my little place :D
Will you be leaving the underside of the roof and steel support exposed? It would be a shame to hide it.

Cheers,
Andy


The total height to the top of the roof is about 7 metres. The underside of the roof is getting PU foam this weekend. So we will have a better idea then.

The trusses in the workshop till be exposed, we haven't decided on what we will be doing in the house half yet. Any ceilings will be at least 3.5 meters as the walls are 3.8. We are thinking about a light well in the centre. A problem of exposed trusses in the house would be dust and spiders.
Sometimewoodworker
 
Posts: 1848
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Sat Mar 12, 2016 12:16 pm

March 10th


image.jpg


image.jpg


image.jpg


image.jpg


image.jpg


image.jpg


image.jpg
Sometimewoodworker
 
Posts: 1848
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Sun Mar 13, 2016 9:26 am

March 11th


The SSR engineer who came from BKK to inspect the roof and supervise the PU foam decided that the flashing wasn't smooth enough so got the SSF team back to redo it

image.jpg


image.jpg
Long Meaun (uncle Meaung) the welder at work


image.jpg


image.jpg


image.jpg


image.jpg


image.jpg
Sometimewoodworker
 
Posts: 1848
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Sun Mar 13, 2016 9:51 am

March 12th


A lot going on today

image.jpg
Render mixing


image.jpg
Rough coat


image.jpg
Getting ready for tomorrow's concrete


image.jpg
The crane is going up


image.jpg


image.jpg


image.jpg



To follow

PU is also going up today
Sometimewoodworker
 
Posts: 1848
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Sun Mar 13, 2016 11:12 am

March 12th


A lot going on today, continued

image.jpg
Getting knotted ;) demonstrating a bowline for a safe loop


image.jpg
Note the disposable safety head wear, a large plastic food bag :)


image.jpg


image.jpg


image.jpg


image.jpg


image.jpg
Sometimewoodworker
 
Posts: 1848
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby pipoz » Sun Mar 13, 2016 12:55 pm

Excellent progress, but me, I wouldn't be up on the ladder (scared of heights) :lol:

pipoz
User avatar
pipoz
 
Posts: 1908
Joined: Mon Jan 23, 2012 10:41 pm
Location: Udon Thani Sometimes

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Sun Mar 13, 2016 1:27 pm

pipoz wrote:Excellent progress, but me, I wouldn't be up on the ladder (scared of heights) :lol:

pipoz

I'm okay with heights, it's widths that worry me :lol: :lol:
Sometimewoodworker
 
Posts: 1848
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Sun Mar 13, 2016 10:02 pm

March 13th



A lot going on today again



image.jpg
Setting up stabiliser plates for the crane trolley


image.jpg
A boring job


image.jpg
Burning holes larger to fit the HT bolts


image.jpg
What do you do if you were not careful with shuttering


image.jpg
Having got the holes in the correct places in the stays it's time to place them in the end truck


image.jpg
A reminder of the design weight lifting capacity


image.jpg
Any colour you want as long as it is yellow, ( black stripes were suggested)

More later
Sometimewoodworker
 
Posts: 1848
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

PreviousNext

Return to Your Building Story

Who is online

Users browsing this forum: No registered users and 1 guest