Workshop and house, Non Sa-At ½ way between KK & Udon

Any story related to building in the LOS, whether everything turned out hunky dory or not!

Moderators: MGV12, BKKBILL, fredlk

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby MGV12 » Tue Feb 16, 2016 5:44 pm

Sometimewoodworker wrote:
sirgunas wrote:Hi,
Will you be posting an estimated cost of your project?
I maybe starting a project of my own...


Hi

Maybe introducing yourself and what you're thinking of building would be a good idea.

The place for that is under.
http://www.coolthaihouse.com/forum/viewforum.php?f=4


In case you missed it .... he did introduce himself viewtopic.php?f=4&t=5152&p=69812#p69812

“Some days I am an optimistic pessimist ... other days I am a pessimistic optimist”
User avatar
MGV12
 
Posts: 5350
Joined: Wed Jan 23, 2008 4:23 pm
Location: Chiang Mai

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Tue Feb 16, 2016 7:12 pm

schuimpge wrote:Looking good.. Not sure how the support for the crane at the door-side is done, but the other side looks to be a separate column made for it.
At the door-side, looks to be a metal plate that has been tied into the beam/superblock wall, but not very clear from the pictures.
Overall, the more I'm looking at your build, the more I start to plan and look around for getting some land..lol.
I have a nice house and a good amount of area to use as workshop, but seeing the workshop you are building, that's just awesome..

Cheers,
Luc

Thanks.

The other 3 points are strong enough, the 2 beside the garden have separate columns the rear H beam is attached to the top reinforced concrete beam.

The door side is tied into the security room reinforced concrete wall, however I'm not very happy with the length of the bolts even though they are going to fill the area with concrete. So I'm getting them to add a support, c section, box section or round post. I don't mind what shape but it will give me peace of mind.
Sometimewoodworker
 
Posts: 1852
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Tue Feb 16, 2016 7:26 pm

MGV12 wrote:
Sometimewoodworker wrote:
sirgunas wrote:Hi,
Will you be posting an estimated cost of your project?
I maybe starting a project of my own...


Hi

Maybe introducing yourself and what you're thinking of building would be a good idea.

The place for that is under.
http://www.coolthaihouse.com/forum/viewforum.php?f=4


In case you missed it .... he did introduce himself viewtopic.php?f=4&t=5152&p=69812#p69812

Hi
MGV12

No I didn't miss that, I've just been a bit busy.

However in answer to Barry if I did have an estimate, I doubt that an estimated cost of my project would be of much help as it is nothing like a standard build. For example the workshop crane if bought from a crane company would have cost 70% of the total spent on grandmums house, the workshop floor is designed to support a car as well as my woodwork machines.

Probably of much more help would be http://bit.ly/GMnewHouse which cost ฿350,000
Sometimewoodworker
 
Posts: 1852
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby pipoz » Tue Feb 16, 2016 8:57 pm

schuimpge wrote:Looking good.
At the door-side, looks to be a metal plate that has been tied into the beam/superblock wall, but not very clear from the pictures.
Overall, the more I'm looking at your build, the more I start to plan and look around for getting some land..lol.
Cheers,
Luc


I think you will find he has a full height concrete wall behind that connection plate at the door side (the plate is probably anchored back into that concrete wall) as that is where his Nuclear Bunker (Secured Storage Room) is. :lol:

Phil
User avatar
pipoz
 
Posts: 1916
Joined: Mon Jan 23, 2012 10:41 pm
Location: Udon Thani Sometimes

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby schuimpge » Tue Feb 16, 2016 10:19 pm

Thanks for pointing out guys. Looked very closely at the pictures and thought the bits rebar sticking out above the blocks was a half finished top beam for the super-blocks... :mrgreen:

To strengthen it. Just move the inside superblock wall at that side of the door about 30cm more to the inside, put rebar in that bigger cavity that you create that way. Fill with concrete and done.
User avatar
schuimpge
 
Posts: 1321
Joined: Mon Dec 10, 2012 11:01 am
Location: Pathumthani, Thailand

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Wed Feb 17, 2016 8:04 am

This may be more clear

image.jpg
image.jpg (54.39 KiB) Viewed 523 times


image.jpg
image.jpg (49.2 KiB) Viewed 523 times


image.jpg


image.jpg


image.jpg
Sometimewoodworker
 
Posts: 1852
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby schuimpge » Wed Feb 17, 2016 10:37 am

Sure clear on how strong that safe is..
Now let me save this for future reference to get in easily...lol.

But back to what I wrote on the extra support. This is what I meant for the column and moving the inside blocks 30cm inwards:

STWW House.jpg
STWW House.jpg (44.78 KiB) Viewed 513 times


moving that a bit inwards and close it between outside wall and the inside wall, gets you enough space to put in rebar and concrete for a support column.

Cheers,
Luc
User avatar
schuimpge
 
Posts: 1321
Joined: Mon Dec 10, 2012 11:01 am
Location: Pathumthani, Thailand

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby jamess1970 » Thu Feb 18, 2016 4:10 am

Sometimewoodworker, you're building a workshop I'd kill for! Is you crane setup going to be powered or just manual movement?
jamess1970
 
Posts: 9
Joined: Fri Jun 05, 2015 3:34 pm
Location: Ohio and Khok Klang

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Thu Feb 18, 2016 7:31 am

jamess1970 wrote:Sometimewoodworker, you're building a workshop I'd kill for! Is you crane setup going to be powered or just manual movement?


Hi James

It will be manuel movement and at the start manuel lift too as night now I have to be careful about cash flow. Also it's intended use is in moving sheets of wood products like MDF, OSB, and plywood then getting finished items onto a workshop dolly. It's being designed to lift up to 500kg. This means that a manuel system will easily be good enough.
Sometimewoodworker
 
Posts: 1852
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Wed Feb 24, 2016 9:52 pm

February 17 ~ 18


image.jpg


image.jpg


image.jpg
An extra been is needed


image.jpg


image.jpg


image.jpg


image.jpg
Sometimewoodworker
 
Posts: 1852
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Wed Feb 24, 2016 10:36 pm

February 18~19


image.jpg


image.jpg


image.jpg


image.jpg


image.jpg
A canary support


image.jpg
Maybe enough sockets:)


image.jpg
Starting on the gutters
Sometimewoodworker
 
Posts: 1852
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby jamess1970 » Thu Feb 25, 2016 2:40 pm

Did they miss that beam on the drawing or did your engineer add it after a site visit? You can never have too many outlets in the workshop or kitchen.
jamess1970
 
Posts: 9
Joined: Fri Jun 05, 2015 3:34 pm
Location: Ohio and Khok Klang

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby schuimpge » Thu Feb 25, 2016 2:42 pm

Will the canary support be encased? Or just leave it bare?

Looking good. Very curious how you'll get your workshop fitted.
(And you're a bit low on power-outlet's if you're not putting at least 4 outlets per point in... :D That's my experience from having 3 power-points with 2 outlets each on a 4 meter workbench, not even close to enough.... :mrgreen: )

Cheers,
Luc
User avatar
schuimpge
 
Posts: 1321
Joined: Mon Dec 10, 2012 11:01 am
Location: Pathumthani, Thailand

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Thu Feb 25, 2016 3:13 pm

jamess1970 wrote:Did they miss that beam on the drawing or did your engineer add it after a site visit? You can never have too many outlets in the workshop or kitchen.

Which beam?
And I agree :D
Sometimewoodworker
 
Posts: 1852
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

Re: Workshop and house, Non Sa-At ½ way between KK & Udon

Postby Sometimewoodworker » Thu Feb 25, 2016 3:14 pm

schuimpge wrote:Will the canary support be encased? Or just leave it bare?

Looking good. Very curious how you'll get your workshop fitted.
(And you're a bit low on power-outlet's if you're not putting at least 4 outlets per point in... :D That's my experience from having 3 power-points with 2 outlets each on a 4 meter workbench, not even close to enough.... :mrgreen: )

Cheers,
Luc

I have double outlets every 1/2 metre. Enough?
Sometimewoodworker
 
Posts: 1852
Joined: Wed Sep 19, 2007 1:22 pm
Location: Non Sa-At / Tokyo

PreviousNext

Return to Your Building Story

Who is online

Users browsing this forum: No registered users and 3 guests