double glazing in alu frame?

Information about windows and doors.

Moderator: MGV12

double glazing in alu frame?

Postby rob28 » Mon Apr 14, 2008 4:21 pm

I wondered if it is possible to put double glazing in an aluminium frame.
I want sliding doors that are sound proof. the thing with the vinyl frames is that they only come in white and i don't think painting them will look nice.
rob28
 
Posts: 10
Joined: Wed May 30, 2007 3:36 pm

Re: double glazing in alu frame?

Postby H... » Thu Nov 05, 2009 9:31 am

Bump

I need black frames that are double glazed too!
H...
 
Posts: 9
Joined: Sat Oct 10, 2009 12:24 pm

Re: double glazing in alu frame?

Postby Poi Fai Malaiporn » Thu Nov 05, 2009 10:56 am

from what I've seen all around.. double glazed windows in thailand are rare.. and only available in upvc, white color.
this double glazed have to be made in factory and the cheaper i've seen in shops like "global" is the chinese stuff.. that I think is SHIT.. specially the lockers system..etc..

In europe you can have double glazed in alu or wood.. if your budget is not a worry then you can have all the european / american stuff as well here.. but on a budget price you may have to go for upvc.

also think about your walls... do they fit the thermic and sound proof standart to include double glazed windows if not it will be a loose of money only to install this on a one line brick wall for example.

hope I help a bit ^^
User avatar
Poi Fai Malaiporn
 
Posts: 40
Joined: Tue Sep 29, 2009 12:42 pm

Re: double glazing in alu frame?

Postby H... » Fri Nov 06, 2009 4:10 pm

After a bit of research it seems the most 'sound proof' way to go for windows is a casement system rather than sliding - no matter what glass is used the 'seal' between frame and panel will always allow some sound through. Depends on how much noise you need to cut out.
H...
 
Posts: 9
Joined: Sat Oct 10, 2009 12:24 pm

Re: double glazing in alu frame?

Postby thaifly » Sat Nov 07, 2009 7:53 pm

its a gidday to H. and all..its the thai fly from mae rim....double glazed ...WINDOW.. units have been around since the... DAY DOT. :) . for the average modest budget build..particular on C.T.H. .they are a expensive item :!: :!: ..and by choosing another alternative..the money saved can be used in better ways.. :P :P ..but if you have sh.t load of baht go for it 8) 8) its .. a go go CHELSEA F.C.TOMORROW..GOT PLENTY ON ..GIDDAY TO ALL..its the thai fly from mae rim
thaifly
 
Posts: 825
Joined: Thu Mar 15, 2007 8:29 pm
Location: mae rim...chiang mai

Re: double glazing in alu frame?

Postby BKKBILL » Sun Nov 08, 2009 9:44 am

Here in Thailand we deal with a temperature difference of about 10 to 15 degrees C inside to outside to stay comfortable. I think the cost of double and now triple glazing is not worth it for this difference. A double glazed casement window with clear glass has an insulating value of R-2.0 (U 0.50) single glazed has a value of R-1.0. Keeping the sun off walls and venting attic space should be the most cost effective solution here. Just to put it in perspective the insulating requirements for walls and ceilings in cold climates, R-19 in walls and floors: R-38 to R-49 in ceilings below ventilated attics. That leaves the R-1 difference for window quite small.
Bests spend the Baht on insulating block. foil under the tile roof and a few trees. IMHO.
How do they get the deer to cross at that yellow road sign?
User avatar
BKKBILL
 
Posts: 510
Joined: Tue May 26, 2009 10:05 pm
Location: For now Talingchan, BKK

Re: double glazing in alu frame?

Postby MGV12 » Sun Nov 08, 2009 9:59 am

BKKBILL wrote:Here in Thailand we deal with a temperature difference of about 10 to 15 degrees C inside to outside to stay comfortable. I think the cost of double and now triple glazing is not worth it for this difference. A double glazed casement window with clear glass has an insulating value of R-2.0 (U 0.50) single glazed has a value of R-1.0. Keeping the sun off walls and venting attic space should be the most cost effective solution here. Just to put it in perspective the insulating requirements for walls and ceilings in cold climates, R-19 in walls and floors: R-38 to R-49 in ceilings below ventilated attics. That leaves the R-1 difference for window quite small.
Bests spend the Baht on insulating block. foil under the tile roof and a few trees. IMHO.


Well said BKKKBILL and on the button -- take account of the Sun's path, throughout the year as it moves between hemispheres, when you place your windows and if some are essential in exposed locations incorporate shade in your design or plant a tree and help save the planet. Always worth a little extra for tinted glass due to reflected rays but more than this is not necessary; unless you have a noise problem as well.
In possessing knowledge you are knowledgeable .... if you can apply that knowledge you are intelligent
User avatar
MGV12
 
Posts: 349
Joined: Wed Jan 23, 2008 4:23 pm
Location: Chiang Mai Province

Re: double glazing in alu frame?

Postby H... » Sun Nov 08, 2009 11:29 am

thaifly wrote:its a gidday to H. and all..its the thai fly from mae rim....double glazed ...WINDOW.. units have been around since the... DAY DOT. :) . for the average modest budget build..particular on C.T.H. .they are a expensive item :!: :!: ..and by choosing another alternative..the money saved can be used in better ways.. :P :P ..but if you have sh.t load of baht go for it 8) 8) its .. a go go CHELSEA F.C.TOMORROW..GOT PLENTY ON ..GIDDAY TO ALL..its the thai fly from mae rim


Hey thaifly - Not saying casement is way for everyone but the most 'noise proof' system will be a casement system rather than sliding - single,double or whatever glassing and what ever frame ali or uPVC. Of course you pays ya money and takes your choice!
H...
 
Posts: 9
Joined: Sat Oct 10, 2009 12:24 pm

Re: double glazing in alu frame?

Postby BKKBILL » Sun Nov 08, 2009 12:59 pm

Just a little more on windows. MGV12 brings up a good point about tined glazing. Put film on my car windows a few years back and there was a noticeable difference. To cut heat gain, select glazing with a high shading coefficient. Glazing with a high UV value will block nearly all furniture-fading ultraviolet rays. My last house in Canada had Vinyl double glazed windows with low-e glass a virtually invisible metallic coating that blocks radiant heat transfer and protects carpets and furnishings from fading by reducing damaging ultraviolet rays from the sun. These were classed as “Super” windows having two low-e coatings to achieve incredibly high R-8 insulation values. I don’t know how much of a difference this or solar bronze and solar gray tinted glass will have with single glazing but I’m sure there will be some.
How do they get the deer to cross at that yellow road sign?
User avatar
BKKBILL
 
Posts: 510
Joined: Tue May 26, 2009 10:05 pm
Location: For now Talingchan, BKK


Return to windows and doors

Who is online

Users browsing this forum: Google [Bot] and 1 guest